THE MLT THREE PRE RIG TRUSS

THE FAMOUS MLT ONE AND MLT TWO PRE RIG TRUSSES GET A NEW MEMBER TO COMPLETE THE MLT SERIES:

THE MLT THREE

MLT THREE - MOVING LIGHT TRUSS THREE

The MLT THREE has no closed head frame and is open at the bottom.

This makes it easier to mount moving lights or video modules in the truss.

The dolly of the MLT THREE has extended telescopic legs that allow you to mount complete video modules including the hanging frame in the truss and leave them in the truss during transportation.
(The video modules should be secured against swinging before transportation).

A rail system is available as an option for the MLT THREE, which makes mounting the units in the truss even easier.
The rail system is a double rail system. This means that the units can be hung on 2 different levels and no lowering device is required.
The rail system also allows you to mount the lighting equipment at the transitions between two trusses and to create seamless transitions between the video modules in the trusses.

When loaded vertically, the load capacity of the MLT THREE Pre Rig Truss is the same as that of the MLT TWO Pre Rig Truss.
When using both systems in a track, the static calculation of the MLT THREE must be applied.

Of course, the MLT THREE has telescopic legs, folding legs and rotating fork connectors, just like the MLT TWO.

MLT THREE
PRODUCT
VIDEO

Features and advantages of the MLT THREE at a glance

OPEN AT THE BOTTOM:

The MLT THREE has no closed head frame and is open at the bottom.
This makes it easier to mount moving lights or video modules in the truss.

EXTENDED TELESCOPIC LEGS:

The dolly of the MLT THREE has extended telescopic legs that allow you to mount complete video modules including the hanging frame in the truss and leave them in the truss during transportation.

OPTIONAL RAIL SYSTEM:

A double rail system is available as an option, which makes mounting the units in the truss even easier: the units can be suspended at 2 different levels. A lowering device is not required.

fully compatible with the MLT TWO and MLT ONE

The MLT THREE trusses and dollies can easily be combined with the trusses and dollies of the MLT TWO and MLT ONE series.

 

 

Extensive, practical accessories complement the MLT THREE product series:

RAIL SYSTEM

A rail system is optionally available for the MLT THREE, which makes mounting the units in the truss even easier.

The rail system is a double rail system. This means that the units can be hung on 2 different levels and no lowering device is required.

The rail system also allows you to mount the lighting at the transitions between two trusses and to create seamless transitions between the video modules in the trusses.

 

LOWERING T-BAR

The Lowering T-Bar is used to mount smaller devices a little lower in the MLT THREE, to avoid interfering of the lower main tubes of the MLT THREE.

The Lowering T-Bar is attached below the central main tube.
It is steplessly adjustable up to 100 mm height and adapts to the respective size of the lamp.

DISTANCE HOLDER

It serves as both a distance holder and a stacking aid between the MLT THREE dolly and the MLT THREE truss, creating a 150mm gap between the top of the pre rig truss and the bottom of the dolly.

The distance holder is black powder coated.

One set consists of 2 pieces.

PROTECTION COVER

The protection cover for the MLT THREE Pre Rig Truss offers the sensitive lighting technology protection from rain and sun during set-up and dismantling and, if required, also during the show.

By pulling the protection cover under the truss instead of over the MLT THREE, the moving lights with unblocked PAN-TILT are secured during transport.

Rolled up, the protection cover remains on the truss during the show and is virtually invisible.

The protection cover fits perfectly on the MLT THREE and MLT TWO, but also fits trusses from other manufacturers.

LOWERING SET

The lowering set is used to mount smaller equipment a little lower in the MLT THREE Pre Rig Truss.

The lowering set is attached below the central tube in the truss.
It is adjustable in 4 different heights and can be adapted accordingly to the respective size of the lamp.

RIGGING FRAME

The rigging frame is for vertical use of the MLT THREE Pre Rig Truss.
The rigging frame is made of steel and comes incl. bolt set and 3.25 t shackle; WLL 1000 kg.

 

DOLLY ATTACHMENT FOR VERTICAL CURVED USE

Aluminium dolly attachment for vertical curved use.

GIZMO LOAD BALANCER - WLL 1000 kg

Black powder coated steel Gizmo which can also be used as a load balancer; WLL 1000 kg.

The Gizmo has one side with male forks, the other side with female forks as connection between two MLTs.

GIZMO - WLL 500 kg

Black powder-coated steel Gizmo; WLL 500 kg.

MEASURING TOOL / CURVING TOOL

The measuring tool or also called curving tool is a practical tool for adjusting 10-70mm and for countering the screw forks of the MLT THREE trusses.

FORKLIFT ADAPTER

The forklift adapter can be mounted on the MLT THREE dollies.

It is made of steel and protects the truss, cables and other equipment during transportation with the forklift.

ACCESSORIES BOX

The accessory box is inserted into the MLT THREE dolly and offers practical storage space for other MLT accessories as well as for lighting accessories.

LOCKING PIN

Locking Pin to secure the MLT THREE truss to the dolly.

FIXING TOOL

Fixing tool for locking the screw forks of MLT THREE pre rig truss.

SPACER MALE/FEMALE

Spacer male/female for the MLT THREE Pre Rig Truss.

TRUSS PROTECTOR

Truss protector for 48-52mm tube. Material: PVC



looking for more information?


Just call us (+49 5452 9733-10) or send us an email: sales@h-of.de


You will find all MLT THREE Pre Rig Truss products in our shop.
 

TO THE SHOP

 

successful references say more than a 1000 words.

Let the show begiN!

Jan Delay & co create a great atmosphere in St. Gallen

The opening days of the St. Galler Kantonalbank Hall were a full success. Stagelight Switzerland conjured up an impressive show with our products! Our MLT TWO and ONE Pre Rig trusses, the HOFFORK 350-5 and our POST Dollies were used.
The MLT TWO and ONE proved once their strengths, especially when it comes to saving time during set-up and dismantling. The MLT TWO and ONE were used as front trusses as well as trusses for a large part of the stage effect lighting equipped with Robe iForte in the stage area.
Stagelight used our HOFFORK 350-5 for the LED walls on stage. On the stage itself, our POST Dollies, equipped with MLTs, were used for various vertical applications.

Read more

holy shit...!

THE META CUBE STAGE

For the Oslo shows of the truly unique Norwegian hip hop group KARPE, the artists wanted a Meta cube as a main element for the show.

This time, it was not about a simple flown stage area like in 2017. This time, the flying stage got a moveable hood in the sizes of approximately 12 x 12 x 3.5 metres: the Meta Cube.

The complete flown construction was covered with Plexiglass plates and a diffusion film which causes the cube to become transparent or in a frosted glass look. This allowed the group to make changes on the stage during the show without anyone noticing.
Inside the cube was a 2.5 x 2.5m lifting platform, which could be moved up, and which enabled the artists to perform not only inside the cube, but also on the upper platform of the cube above the band. The Meta Cube was an integral part of the light design.

 

Read more

BABY BOY STAGE

...NOT ICE ICE, BUT PROPERLY, BABY!…

An eye-catcher is our Baby Boy Stage. The roof can be built in up to 12 different versions. In its fully expanded version, the stage has a surface of 28x16 meters. The roof has a height of approx. 10 meters from the top edge of the stage platform.
Thanks to is flat roof shape and the special design, most of the rainwater is derived to the back. The optional passive towers allow a roof load of up to 14 tons, depending on the wind zone, construction version and positioning of the load. The systems HOFFORK 350-4 and HOFFORK 620-4 were used.
The ballast of 4 tons per tower is situated directly in the 2-part base, which can be comfortably manoeuvered by forklift or crane.

READ more

LAMBORGHINI AUTOcity PAVILLON

HOME OF the holy shit

That is what we’ve also implemented at the Lamborghini Pavilion of Autostadt Wolfsburg.
About a ton-heavy car is on a disc with five meters diameter that is both vertical and through the central axis rotatable.
The aluminum construction is driven by a hydraulic motor.

READ MORE

Flying STAGE

OSLO FLY HIGH - FLY HIGHER

In Oslo, Norway, we have installed this 400m² high-end stage using only 39 motor chainhoists. This stage looks extremely flat because both the HOFBOLT 200-2 Grid Truss system and the special stage platforms are very small sized.
Not only is HOFBOLT 200-2 Grid Truss extremely small, it also has a very high load capacity comparing to its size. HOFBOLT 200-2 Grid Truss is therefore often used in: trade fairs, shows, as false ceilings or suspended ceiling and as a rear/back wall construction for stages etc.

READ MORE

video WALL allianz arena

MUNICH GETS NEW LED WALL...

... Done!
The substructure for the new 21 x 9 m video walls in Munich came from our production. The customer wanted approx. 200 m² video wall, which is more than twice as much space as the previous walls. The challenge was to use the 'old' hanging points for the new LED wall, but these hanging points were quite close, only a 10m gap in between them, in relation to the size of the new wall. We faced a so-called overhang to left and right of each about 5 meters, which is really large. With the weight of 18 tons per unit (200 m² LED screen, 40 m² LED screen, under construction and cabling), such bendingmoments are more than exceptional.

READ MORE

SUPER STAGE

THIS STAGE BANGS

With the HOFFORK trusses the SuperStage can be build up to a maximum size of 22 x 15 and 17.5 meters.
Due to the variable use of the trusses sizes, this stage can be built in multiple sizes. Additionally the stage can be extended with side storage and a porch-roof from up to 2.5 to 3.75 meters. The roof load is 18 tons without PA wings!

READ MORE

video CUBE AT FC schalke 04

EUROPE'S LARGEST

An eye-catcher in the Veltins-Arena at FC Schalke 04 - Europe's biggest video cube.
The substructure: made by HOF.
The challenges were not to increase the weight of construction, despite the LED screen increase by approximately 30% and the tight time frame of approximately four months, for: design, construction, structural analysis including testing, material procurement, manufacturing and assembly on site.

305 m² LED screen, total weight 30 tons and the weight of the substructure is approximately 11 tons of aluminium.

READ MORE

advent CROWN lüneburg

A PROPER ADVENT CROWN

... with 13 meters in diameter and a weight of 1.5 tons lights up Europe’s biggest water tower in Lüneburg. A combination of the 520-4 HOFBOLT and 290-4 HOFKON systems finds a total of 24 candles on the aluminum advent crown.
The Advent wreath, or Wichernkranz, is lifted up the 56-metre-high tower every year and is not only an eye-catcher, but also solicits donations for people in need.

READ MORE