It’s not an evolution – it’s a revolution! We are proudly presenting: MONOBLOQ

The new Monobloq rigging system is going to revolutionize the way of rigging: All you need is a single fix cable plus Monobloq to create your hanging point. The patented system allows a cable adjustment in seconds and the installation of up to 8 bridles per hour with 2 technicians.

Safe. Quick Adjustment. Easy to handle.

This is how Monobloq works:
Insert the 8mm steel rope into the open Monobloq device for 8mm steel ropes (or the 10mm steel rope into the open Monobloq device for 10mm steel ropes).

Once the steel rope is in the device, the pressure wedge is placed in the Monobloq body recess and the cover is fixed by 3 fixing screws. Then the shackle is mounted and gets attached to the structural element.
Once Monobloq is suspended from the shackle, the length of the cable can be adjusted by exerting two-handed effort in the desired direction of travel. To fix the cable at a given point, a manual load must be exerted.
Finally, insert the set screw on the side opposite the load and screw until it is tightened.
Ready for use!

We offer 2 different Monobloq bodies: one for 8mm steel ropes and one for 10 mm steel ropes.
To operate with each of these diameters, the corresponding pressure wedge must be used. In both cases the installation is done in the same way.

Click here for more information